灌注桩钢筋笼内部的磁异常特征

通过分析有限长直立圆柱体内部的磁异常特征,结合模型桩试验,研究了灌注桩钢筋笼内部的磁异常特征,结果表明在钢筋笼内部钻孔中的磁异常Za 垂直分量总体上呈现"两峰夹一谷"的特征,钢筋笼中部呈宽缓的马鞍形负异常,钢筋笼底端位置对应磁异常从极小值转变为极大值的拐点,相应梯度曲线出现极大值.     

利用钻芯孔检测灌注桩钢筋笼长度的方法

根据充电法原理,结合模型桩试验,分析了钢筋笼周围的充电电场特征,结果表明钢筋笼的底端对应于电位梯度曲线的极小值点及电位曲线的拐点。以此研究结果为基础,提出了利用钻芯孔来检测成桩后钢筋笼长度的方法。某桥的应用表明,该方法简便、实用、可靠。     

Jurassic Tectonics of North China: A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken     

Isotopes and Geochronology of the Meixian-type Pb-Zn-(Ag)Deposits,Central Fujian Rift,South China:Implications for Geological Events

Central Fujian Rift is another new and important volcanogenic massive sulfide Pb-Zn polymetallic metallogenetic belt. In order to find out the material genesis and mineralization period of Meixian-type Pb-Zn-Ag deposits, S and Pb isotope analysis and isotope geochronology of ores and wall rocks for five major deposits are discussed. It is concluded that the composition of sulfur isotope from sulfide ore vary slightly in different deposits and the mean value is close to zero with the 834S ranging from -3.5‰ to ＋5.6‰ averaging at ＋2.0‰, which indicates that the sulfur might originate from magma or possibly erupted directly from volcano or was leached from ore-hosted volcanic rock. The lead from ores in most deposits displays radioactive genesis character （206pb/204pb〉18.140, 207Pb/204pb〉15.584, 208pb/204pb〉38.569） and lead isotope values of ores are higher than those of wall rocks, which indicates that the lead was likely leached from the ore-hosted volcanic rocks. Based on isotope data, two significant Pb-Zn metallogenesis are delineated, which are Mid- and Late-Proterozoic sedimentary exhalative metailogenesis （The single zircon U-Pb, Sm-Nd isochronal and Ar-Ar dating ages of ore- hosted wall rocks are calculated to be among 933-1788 Ma.） and Yanshanian magmatic hydrothermal superimposed and alternated metallogenesis （intrusive SHRIMP zircon U-Pb and Rb-Sr isochronal ages between 127-154 Ma）.     

吉林省海沟金矿床的地球化学异常模式

在总结海沟金矿床区域水系沉积物、矿区水系沉积物及矿体的岩石、土壤地球化学异常特征的基础上,建立了海沟金矿床的地球化学异常模式,并依据该模式对区域47个异常进行了研究对比,预测出一处寻找海沟式金矿床的有望异常。     

夏甸地区Ⅶ-支脉矿体控矿构造特征

构造复合现象的研究,不仅有助于解决构造运动时期先后的问题,而且在生产实践中有着重要的实际意义[1]。本文以山东夏甸地区Ⅶ—支脉矿体为例,通过区域构造、Ⅶ—支构造断裂特征、闪长玢岩构造特征、矿体构造特征的系统研究,结果表明:Ⅶ—支构造的新老构造体系、同一构造体系复合现象突出,多表现为构造形迹的归并。其中成矿断裂的多期活动、构造性质的多次变化、成矿作用的多次叠加是矿体形成的关键因素;在NEE向Ⅶ—支构造与近SN向脉岩截接部位形成矿体,低级序的NNE、NE、NEE向构造成为主要的容矿构造。     

造山带异源浆混花岗岩理论与方法研究

1：5万花岗岩填图方法在区调工作中推广以来,在造山带花岗岩调查实践中,由于造山作用及过程的复杂性,花岗岩浆的多源及多样性,使同源岩浆演化理论及方法遇到了难题。文章在新一轮1：25万造山带试点图幅,在对同源岩浆演化理论及方法的适用性进行探索的同时,提出了异源浆混理论指导造山带内部浆混花岗岩（H型花岗岩）的填图方法。并就异源浆混花岗岩鉴别标志等作了系统总结,提出了浆混组合、浆混单元、浆混体,填图的理论方法体系;给予了浆混花岗岩明确的定义。     

利国矿区铜（金）成矿条件的研究

利国矿区是江苏省重要铁矿基地之一,矿区位于秦岭一昆仑纬向构造带东延的南侧与新华夏构造体系第三隆起带的交接复合部位。铁矿床主要产于燕山期闪长玢岩杂岩体与下奥陶统碳酸盐地层的接触带及其附近灰岩中,矿体呈似层状一透镜状等,产状与围岩一致,具层控矿床的特征。笔者主要从成矿地质特征着手,分析总结了该区铜、金矿化特征及主要成矿规律,指出了利国矿区铜（金）矿的找矿方向和有望靶区。     

地下开采引发地面沉陷的未确知聚类预测方法

对未确知聚类预测法进行优化,并将其应用于开采地面沉陷的预测研究。采用开采地面沉陷的实测数据按最大沉陷量进行分类,利用各分类影响因素的均值表示各分类中心,并确定各影响因素的未确知测度函数。由待测对象指标的综合未确知测度与各分类指标的未确知测度间的距离来确定待预测对象所属等级,给出了预测值的计算公式。经计算验证,该方法的正确率为75％。但在实际应用中,为了保证地表建筑设施等更加安全,允许预测级高判,则正确率可达100％。针对某铁矿一观测点进行预测,并与实测数据比较,结果表明,未确知聚类预测的结果是令人满意的,为开采地面沉陷的预测提供了一种新思路。     

徽县头滩子地区土壤金异常晕与金矿化特征

通过区域地质的研究,分析了头滩子地区的土壤金异常晕,该区土壤晕分布与构造展布方向一致,金异常晕对地层的选择性不明显。指出了构造、热液、地层岩性三位一体控制着金的矿化与成矿。特别是断裂构造是金矿化的必要条件。